PROCESS
-
Melting
The metal base is melted in the melting furnace. Bottom pouring furnace eliminates SLAG, increases production, maintains consistency in QUALITY. Current annual capacity of over 10000 Tons.
-
Rolling
The strip, that has been rolled down to end thickness, passes through a hot and cold rolling stage thus giving it an optimum metal structure. Online Thickness Gauge is used to control the thickness of rolled strips.
-
Punching
The coils feeds through a continuous stretcher to an automatic blanking press producing slugs of varied size. 10 High Speed Pneumatic Power Press help to cater, different Clients & their various sizes.
-
Slug Vibrators
After the Annealing process for surface finish use vibrators for better finish as per client requirement.
-
Caster
The molten metal is fed into a strip caster. A continuous stream of liquid aluminium is fed into the wheel mould which solidify with seconds to an endless aluminium strip
-
Coiler
Coiler is used for Maximum Recovery, Minimum deformation and least changeover time.
-
Annealing
The newly produced slugs pass through Annealing process in an Annealing furnace. While installed furnaces take care of current production, standby facility is capable to match Increased Quantity.